Not spinning, leaking, won't drain, excessive noise — front and top loaders, all major brands.
Clogged or failed drain pumps cleared or replaced — often with a lost coin or sock as the culprit.
Lid switch, door latch, and drive belt issues diagnosed and fixed for top and front loaders.
Excessive shaking or rumbling during spin traced to worn bearings, shocks, or suspension springs.
Door boot seals, pump seals, and hose connections checked to find and fix the exact leak source.
Samsung, LG, Whirlpool and other brand-specific error codes diagnosed and repaired.
Same-day and next-day appointments available across Guelph — most repairs completed on the first visit.
A service call in Guelph runs $80–$120, applied toward the repair. Won't-drain or pump failure is the most common washer repair, running $150–$280. Lid switch or door latch issues, a simple and inexpensive fix, run $120–$220. Excessive vibration from worn drum bearings runs $250–$400 — labour-intensive, especially on front-loaders where disassembly takes longer. Control board failure runs $250–$450 including parts, and leaks run $120–$250 depending on whether the source is a door seal, pump seal, or hose connection.
Front-load washers are the most common repair call in Guelph. They're generally efficient machines, but door boot seals, bearings, and pump filters are known weak points over time. Mold around the door seal is usually a maintenance issue — leaving the door open between cycles prevents it — rather than something requiring repair.
For the full breakdown of when repair makes financial sense by machine age, and a wider set of fault-specific cost ranges, see our guide on whether it's worth repairing a washer in Guelph.
We repair washing machines throughout Guelph and the surrounding region:
A service call runs $80–$120, applied toward the repair. Won't-drain / pump failure runs $150–$280, lid switch or door latch $120–$220, excessive vibration or drum bearing $250–$400, control board failure $250–$450, and leaks $120–$250 depending on the source.
The most common cause is a failed or clogged drain pump, sometimes with a coin, button, or sock lodged in the impeller. A kinked or clogged drain hose is the next most common cause. Both are usually resolved in a single visit.
Excessive vibration or rumbling, especially during spin cycle, usually points to worn drum bearings or shock absorbers/suspension springs. It can also simply be an unlevel machine — worth checking before booking a repair. Bearing repairs are labour-intensive on front-loaders and cost more than on top-loaders.
Generally yes if the washer is under 8–10 years old and the repair is under $350–$600 — roughly half the cost of a new mid-range washer ($700–$1,200 installed). See our full guide on whether it's worth repairing a washer in Guelph for age brackets and specific fault costs.
Yes — Samsung and LG are among our most-serviced brands. Common Samsung error codes we fix include nE/SE (vibration sensor), dc (out of balance), and 4E/4C (water supply). Parts for both brands are generally available within 1–2 days if not already on the truck.
Common sources include a worn door boot seal on front-loaders, a failed pump seal, a cracked or loose hose connection, or an overloaded machine causing overflow. We identify the exact source before quoting the repair.
Tell us what's wrong with your washer and we'll get back to you within 24 hours — same-day service is often available.
Request a Free Quote